Install stone fence six steps

stone fence has been applied very early, to protect animals and poultry to prevent accidental damage. Stone fence installation steps can simply summarized by the following six:

1, calculation of stone fence length and required height. Holding a GPS (global positioning system) new fence along the line go again. This will effectively measurement and draw distance.
2, within budget find suitable stone. Most of the stone fence built are using local usable stone. granite and limestone in stone material construction of the fence is the most common types.
3, will stone cutting into the rough rectangular shape. Stone size can change compared to increase the fence. These stones can usually from local quarry or stone suppliers. Early cut
4 in the need to install the stone fence, dig a trench, the place with loose gravel filling, will chunks of flat stone installation in sand, lay the solid foundation.
5, between fence left some spacing to flow away.
6, continue to install stone align, much circle of a solid stone crisscross pattern joints. If not installed dry stone fences, between the stones can be used mortar. Laying stone, until desired height.