Artificial white marble is a natural white granite as the basic raw materials (accounting for more than 90% finished), the use of polymers (mainly resin) and the corresponding defoamers, UV absorbers and other materials, preparation of chemical slurry, injected curing mold made of a composite material, to a certain extent can also be thought of as a synthetic marble products.
May be different because of the mold sheet made of a variety of shapes, rails, Roman column, pillars, lions and other styling products.
Artificial white marble plaster mold is to use 1:1 or timber made of the shape of the finished product, and then Limestone, or polyvinyl chloride material made of fiberglass turn die, will the prepared slurry into the die, the vibration, pumping vacuum, maintenance, stripping can be.
Simulation of river sand is white marble, marble, talc, cement, reinforcement bars inside, but also with the shape of the required pre-cast mold, then cover with white paint or marble paint, lacquer can be. The basic material is a result of man-made white marble marble, and great strength of the resin used, so in addition to basic physical and chemical properties of the marble rather, some properties also higher than the marble, such as bending strength: 19.0MPa> 7.0MPa (standard indicators) ; compressive strength: 52.6MPa> 20.0MPa (standard indicators); radioactivity within the exposure index <1.0, the use of unrestricted; radioactive external exposure index <1.3, the use of unrestricted; by 600h artificial aging is still superior products, and the color does not change.
The use of river sand and some raw materials to do the simulation enhanced by the use of white marble is just cement and bonding material 20% of the total binder resin of high strength is not used.
Using the Slate two methods can also produce sandmarble, reconstituted marble, art marble, artificial marble works of art, landscape marble, sculpture, murals, etc. The basic principle is the same.
没有评论:
发表评论